The topic you requested could not be found.
Related topics are listed below.

Javascript Settings

Hauptmenü » Settings » Javascript Settings

Special Remarks Some of the settings available in the mz3Viewer version are useless for the Javascript version. Some features had been added to the Javascript version that are not supported in mz3Viewer (e.g. thumbnail bar, burger menu). As result, the…

Settings

Hauptmenü » Settings

The following options are available in the Settings menu: Configure Basic Settings In addition to the book parameters (page width and height, number of pages), the following paths can also be specified for the page type (double or single page): Publish…

mz3Viewer Settings

Hauptmenü » Settings » mz3Viewer Settings

mz3Viewer could support Not all possible options listed in the WIKI (> 300!) are presented here. Most of those are useless now after FLASH is no longer supported. The “balance” momentarily looks like this: Javascript: 64 book parameters, no…

Basic Settings

Hauptmenü » Settings » Basic Settings

The following setting options are available in the “Basic Settings” window: Technology Selection This is the central location to select the used MegaZine3 program variant: For a Server/Javascript Version For a mz3Viewer versions, used on a…

Navigation Bar Settings

Hauptmenü » Settings » Javascript Settings » Navigation Bar Settings

This Configuration Window supports adding or modifying Link- and Language-Buttons for the navigation bar and burger menu. Positioning The navigation bar is split into 3 position blocks Left center right The center position block is…

Pop-Up Settings

Hauptmenü » Settings » Javascript Settings » Pop-Up Settings

The row “PopUp Support” offers a button to open the PopUp Window and Checkbox to enable or disable the Pop-Up. Pop-Up Settings Settings-Area (on the left) All text messages, an optional Icon and the Button-Link can be defined in this…

Convert PDF /w Default Settings

Quick Tours » New Mz3 Book from PDF » Convert PDF /w Default Settings

For the first test don’t change any of the default parameters and immediately click the Start button. . A status window pops up and gives feedback about the conversion progress. For bigger PDF documents the ETA (estimated time of arrival; in this case the…

Element Attributes

Advanced Options » Commands » Element Attributes

The optional element parameters depend on the variant used. So the number of supported options in the Javascript version is smaller than in the mz3Viewer version. Reason: Most of these parameters were rarely used and created confusion instead of being useful. In…

Add Book Background

Hauptmenü » Edit Book » Add Book Background

Add book background An image can be placed behind a Mz3 book. Depending on the used variant (Javascript, mz3Viewer) and the size/aspect ratio of the window, the background image behaves differently: Javascript Javascript Portrait Javascript Landscape The image…

image parameter

Advanced Options » Commands » Element Attributes » image parameter

The short description in the tooltips should be sufficient to understand the effects of the parameters. However, the tooltips are only available in English- Further details can be found in the “Wiki”: https: //megazine3.de/doc/Image (in English only). The…

Open Project Folder

Hauptmenü » Publish / Distribute » Open Project Folder

Open project folder Content Project Folder All data related to an Mz3 book is stored in a specific folder, the project folder. The project folder can be displayed via the menu item Info - Show Project Info. Experienced users have direct access to the…

Publish the Mz3 Book

Quick Tours » New Mz3 Book from PDF » Publish the Mz3 Book

Once all Page Images are assigned to pages, the final book is shown in the preview area of mz3Tool and you can make the first check. To operate the book already in the preview area of mz3Tool, the optionally possible automatic opening of the “Modify Elements…

Set Video Parameters

Advanced Options » Commands » Add Elements » Set Video Parameters

Video parameterization before adding The “add video” window offers controls for Javascript video options directly in this window, i.e. without using the JS setting menu or the Element Attributes – Video Settings window. The following options are…

Add Sound Elements

Hauptmenü » Edit Page » Add Sound Elements

Add audio as a sound element An audio file can be used for different purposes, for example: Background music for an opened page Audio documentation on a page Audio Books Depending on the variant, different functions can be used. Probably the option of placing…

Publish / Distribute

Hauptmenü » Publish / Distribute

sh2. Publish Mz3 book If the Mz3 book is complete or a “real-life-test” is desired, the respective “Package” can be generated via this menu item. First, the book is updated (like called via Commands – Update). A “Package”…

Sound Parameter

Advanced Options » Commands » Element Attributes » Sound Parameter

JS specific audio parameters The Javascript version supports less “bells and whistles” than the mz3Viewer version. A play/pause button or the standard toolbar of the browser can be used instead. 3 different buttons can be selected: The button labeled…

Hauptmenü

Hauptmenü

The main menu is the central command of mz3Tool. Almost all actions are started here. In this chapter each menu and submenu item is described in detail !{IMAGE-LINK+Main Menu}! The menu structure looks like this: File New New from PDF Use Other…

Browse XAMPP Project

Hauptmenü » Publish / Distribute » Browse XAMPP Project

Open a JS package in the Browser If you use the Javascript version of Megazine3 to display the Mz3 book over the Internet in a browser, then the option of being able to test the finished book locally on your own computer is very helpful. For this to work and to…

MegaZine3

Overview – Introduction » MegaZine3

MegaZine3 is a complete and easy to use solution for digital publishing eBooks catalogs photo books reports company brochures and more… All such “Mz3 Books” offer a bunch of functionalities like Page Flip Embedded Images, Video, Sound,…

Google Analytics Support

Advanced Options » Commands » Book Attributes » Google Analytics Support

Improved Google Analytics Support for JavaScript Now a more granular reporting is supported, i.e. all three levels of details plus an optional value are supported now: event category label value *Enabling Google Analytics tracking is very easy: only the…

Hauptmenü » Publish / Distribute »

Open XAMPP project folder Content XAMPP project folder Begriffserläuterung: Javascript “Package” A JS package is a folder where, after selecting Command – Publish / Distribute and clicking!…

Build Thumbnails

Hauptmenü » Edit Book » Add Page Images » Build Thumbnails

Thumbnails for the Javascript VersionF Since Version 2.4.3.13 Thumbnails are supported in the Javascript Version also. These Thumbnails are built automatically whenever Page Images are assigned to pages.(see Add Page Images) If no Page Images are used, e.g. in…

Past Versions

Versions » Past Versions

v2.4.3.13 The most important changes of this version 2.4.3.13 are:: 2019-04-07 Minor Bug Fixes Values for dragrange could not be made with the slider Position auf language code was too close to the elements of the navbar if the language code was added to the…

Actual Version

Versions » Actual Version

v2.4.4.04 Major Version Change !This is a major version change with modifications in some general data structures! Please read the following hints carefully! Due to data consolidation to avoid inconsistencies (the same or similar data was kept in different files)…

XAMPP: Local Server

Advanced Options » XAMPP: Local Server

The javascript version can currently only be run on a server. Therefore, the Javascript Package must be up loaded to a server and viewed over the Internet in a browser. Usually, this is a server offered by a provider (as dedicated, managed or shared server). But: For…

Select Page Images

Quick Tours » New Mz3 Book from PDF » Select Page Images

Select the image type you want to use: JPG Ideal for “real” images like photos. Due to the compression, this format saves space on disk and (download) time. Not the best choice for small text: high resolution and low compression rate are needed, which…

Book Attributes

Advanced Options » Commands » Book Attributes

JS specific book parameters Actually, there is one parameter that is only supported in the Javascript version: jsLanguageToggle If set to true, only one language icon will be displayed and a click will advance to the next available language. Advantage: This will…

Test

Basics » Test

Once the book is ready, it has to be tested: Completeness Working of Video and Audio Look&Feel E.g.: hardcover pages, fold effects, book size, the aspect ratio of images, correct overlapping of images, links working and pointing to the correct address,…

Server Upload

Basics » Server Upload

The Javascript version of MegaZine3 is built by mz3Tool as “Online Packages”. To offer/distribute Mz3 Books over the Internet, the appropriate Online Package must be located on a server. From there the data (the “pages”) are accessed by the…

Open in Viewer

Hauptmenü » Publish / Distribute » Open in Viewer

Show Mz3 book in mz3Viewer For better control, an Mz3 book should be checked in mz3Viewer (or, if Javascript is the final goal: locally in a browser supported by XAMPP; see Browse XAMPP Project) This helps when interactive operations should be tested that do not…

Add Video Elements

Hauptmenü » Edit Page » Add Video Elements

Also movies can be displayed in the book, i.e. directly within a page. In case of Javascript movies must not span across the fold (middle) of the book. Otherwise the video will be shown in a new tab or window. Set video parameters for JS With a Javascript, the…

Add Elements

Advanced Options » Commands » Add Elements

Add Media and Links What are Elements? An “element” is generally “something” that can be added to a page; on top of a page background. The following “elements” are currently supported: Images (Image Element) Video (Video /…

Preparation

Overview – Introduction » Preparation

This paper is the one and only key reference for all topics related to mz3Tool, MegaZine3, and mz3Viewer. Outdated documentation will be taken offline soon. * You’ll find a link to the “paper version” as PDF-Version on the left of the ToC (table of…

Program Suite

Basics » Program Suite

The MegaZine3 Suite includes three programs: mz3Tool This is the main interface you’ll use to create and manage Mz3 Books. It is kind of IDE (Integrated Development Environment). megazine3 the megazine program comes in three flavors (3 different programs…

Enhance Preview Image

Hauptmenü » Edit Page » Add Video Elements » Enhance Preview Image

Edit preview image After the preview image has been selected, it can be edited Use of a prepared preview image If instead of a snapshot from the video an own image should be used as a preview image, this can be selected via the Browse button. Alternatively, a…

Commands

Advanced Options » Commands

Convert PDF Create Mz3 book from PDF file Add Page Images Set page images on pages Add Elements to Pages Add Image Free pictures or layouts on pages in the layout Add Video Capture a video preview image and put it on a page. Note: In mz3Viewer the video…

MegaZine3 Help

Basics » Program Suite » MegaZine3 Help

Many operations are identical or very similar in both versions of MegaZine3 (Javascript, Mz3Viewer). Here we’ll focus on the differences. This chapter is a “work in progress”. General operation instructions are considered, but not planned…

Select Preview Image

Hauptmenü » Edit Page » Add Video Elements » Select Preview Image

Note: A Preview Image is displayed instead of a video in the Mz3 book when the corresponding book page opens, This preview image is mostly an image taken from the video. It should clearly mark the content of the video. Ideally, the preview image also displays the title…

Overview – Introduction

Overview – Introduction

The program package “mz3Tool” is a comfortable and powerful tool for building book-like documents (catalogs, magazines, books, company profiles and more). This IDE (integrated development environment) guides you through all steps from a PDF file or just…

mz3Viewer

Overview – Introduction » mz3Viewer

mz3Viewer is available for WIndows 10 and MAC OSx. mz3Viewer “digests” mz3z- ot the original mz3-files and presents based on that information and data the respective Mz3 Book. mz3Viewer offers the full functionality as you might know from the old…

Workflow

Basics » Workflow

For a better understanding of the kind of “jobs” you have to perform, such actions are listed as “workflow” below: Download and Installation This step is explained in detail in the chapter Download and Installation and is needed the first time…

Show PDF Info

Hauptmenü » » Show PDF Info

Show PDF Info From the currently assigned PDF file, many settings and parameters are read which can be displayed via this menu item, e.g. the page size of the first and second page, the number of pages, creation date etc. *A double-click in the window opens the…

AIR Link / Area Parameter

Advanced Options » Commands » Element Attributes » AIR Link / Area Parameter

!All settings are only supported in the mz3Viewer version! The brief description of the individual parameters should be sufficient for a general understanding of the parameters. Further details can be found in special chapters of the Wiki: Wiki Area Wiki…

Save project as …

Hauptmenü » File » Save project as …

Save Mz3 project under a new name Via this menu item the current Mz3 project can be saved under a different, new Mz3 project name. A 100% copy of the current Mz3 project will be created. A copy can be made for different reasons, for example: Test settings…

Context Help

Overview – Introduction » Context Help

For the new “context help feature” of mz3Tool, this documentation is used. mz3Tool always opens the documentation in the same version the matches the version of the actually used program. The context help window opens automatically with the start of…

Download and Installation

Overview – Introduction » Download and Installation

If mz3Tool isn’t installed yet, please follow the following steps. mz3Demo Download mz3Tool is available as test version mz3Demo. This version offers almost full functionality and is available as free download. Please select your version and click the…

Configuration Files

Basics » Configuration Files

Mz3Tool and MegaZine3 make use of several configuration files to save program settings and Mz3 Book parameters. Although usually not needed (all those parameters are managed automatically in the background), it can be helpful knowing about those files. A look into…

Quick Tours

Quick Tours

Actually, 3 different workflows cor building a new Mz3 Book from scratch are demonstrated. All use standard settings to achieve quick results. from PDF: Convert a PDF file and use the created “page images” as pages for a new Mz3 Book from Images…

Add Elements PopUp Menu

Advanced Options » Commands » Add Elements » Add Elements PopUp Menu

As soon as at least one element (image, video, audio) has been selected, this small selection window is displayed. It contains special commands that are specific to the currently selected element. Illegal commands are disabled (grayed out) Possible commands: Add…

Manage Elements

Hauptmenü » Edit Page » Manage Elements

Change and manage Elements Once the Mz3 book is filled with content, sooner or later there is a need for change. Without help in analyzing the content of several configuration files it’s difficult to find answers on questions like these: Why is my image not…

Basics

Basics

This information should help in getting a better understanding of the structure and concept of MegaZine3, mz3Tool, and mz3Viewer. And how those programs work together. If you can achieve everything you want without deeper knowledge of the internals: perfectly fine! At…

First Steps

Overview – Introduction » First Steps

This information will guide you doing the first baby steps, i.e. as long as no Mz3 Book was found in the system. In that case, the context help opens automatically and provides guidance; until you created your first 5 Mz3 Titles. After that the Context Help is no…

Add Link / Area

Hauptmenü » Edit Page » Add Link / Area

Add links as link “element” With this special element, links (clickable areas, “area”) can be placed anywhere in the Mz3 book. !Links are only set to pages in the selected language! Exception: Select “All”!…

Create a Book from Scratch

Quick Tours » Layout based New Mz3 Book » Create a Book from Scratch

Select File – New in the main menu.. In the window that opens you can set the page parameters (page size, page count, book type). Page Size If you already prepared the Page Images (and you should!), then you know the aspect ratio and can set a page…

Convert PDF

Hauptmenü » File » Convert PDF

PDF conversion p. A book can be assigned a PDF file. This is usually done when creating a new book (File – New from PDF). However, another PDF file can be selected later on at any time, from which page images can also be created by conversion (File – Use…

Language Selection

Hauptmenü » Settings » Language Selection

The language-specific settings are available in a context menu that opens with a right click on the language code. That language is selected and the following options are available for that language: Set As Default Language (set default…

Book Parameter Input Window

Advanced Options » Commands » Book Attributes » Book Parameter Input Window

If you click a row/cell, a new window opens with a list of all parameters that are part of the group the parameter is assigned to. Change values The current value of the selected attribute is displayed and can be changed via the specific and type-dependent…

Open Project

Hauptmenü » File » Open Project

Open Mz3 project This command offers a table (data grid) listing all Mz3 Projects with most project-specific information. *The Mz3 Project Base Path can be changed via Basic Settings. After selecting File - Open, a window opens with a table showing all projects…